Purpose

The purpose of this document is to provide set up information on the SNMP integration.

Introduction

HIABs can pass events via SNMP and integrate into SIEM/Log management solutions.

Set Up SNMP

1. To set up SNMP, go to Main Menu > Settings > Integrations.
2. Select the SNMP tab.
   
   
   
   
   

3. Provide the below information to use SNMP:

   Option	Description
   Version	Select either 2 or 3 depending on the SNMP version you are using.
   Host	Provide the hostname.
   Port	Provide the port number SNMP is using to communicate. Default: 162
   Community	Add a password that is shared by multiple SNMP agents.
   Prefix	Enter any word that you want to add as a prefix for each line.
   Status	Click on this button to check the network connectivity.
   Save	Click on this button to save the current settings.

Reference

Integrations

_Copyright

_{© 2022 Outpost24® All rights reserved. This document may only be redistributed unedited and unaltered. This document may be cited and referenced only if clearly crediting Outpost24® and this document as the source. Any other reproduction and redistribution in print or electronically is strictly prohibited without explicit permission.}

_Trademark

_{Outpost24® and OUTSCAN™ are trademarks of Outpost24® in Sweden and other countries.}